Fishing net repair refers to repairing the mesh with the same specification fishing net line. Fishing net manufacturers and fishermen are most often exposed to the technology of "net repairing". For fishing net manufacturers, in China, whether it is a knotted net or a non-knotted net, there will always be holes in the fishing net during the weaving process of the fishing net, or during the setting, storage and handling. For fishery practitioners, net repairing technology is a must, because fishing nets often break during fishing operations. Its frequency is directly proportional to the number of catches. No matter whether it is towed, rounded up or fixed, damage is inevitable. Even during the storage of fishing nets, similar situations will also occur due to improper storage or pecking by animals. Therefore, to ensure the normal carrying out of fishery fishing, the repair work of net gear is very important.

In order to make full use of the nets, the broken and damaged nets should be repaired. Therefore, mending the nets becomes one of the important basic techniques that fishing workers and fishnet factories need to master.

Fishing net repair work is generally divided into three steps:

1. First, observe the damage of the mesh. There are various kinds of damage to the mesh, and the degree of damage is different. There are roughly three types: holes, cracks and cracks on the hypotenuse. According to the situation, it should be sorted out properly, and then repaired with fishing net line.

2. Determine the repair method according to the shape and size of the hole.

3. Use appropriate repair methods to carry out repair work, not only with good quality, but also with fast speed.

There are generally two methods of repairing netting:

1. The patching method The patching method is suitable for netting repairs of small holes and cracks. Most commonly used. Familiar with the patching method to avoid the occurrence of small holes hanging and tearing the mesh. The supplementary method is divided into single-line supplementary method and double-line supplementary method. The single-line mending method is aimed at the net clothing of the gillnet, and the process requirements are relatively strict. Save labor and materials. The double line patching method is relatively expensive, but the patching speed is fast and the process requirements are low.

2. The embedding method is suitable for large holes in fishing nets. The embedding and patching method is also called the digging and patching method. It is very efficient for repairing large holes and can greatly save time and manpower. The above briefly introduces the fishing net repair technology, mastering this technology is of great significance to both fishermen and fishing net manufacturers.